English 
日本語 
한국어 
français 
Español 
русский 
العربية 
tiếng việt 
ไทย 
čeština 
română 
Anchor rig is only one type of bolting machine, which is mainly used for foundation projects such as tunnels, foundation pit support, dam foundation reinforcement, and anchor cable engineering. When doing anchor cable engineering, it can fix the anchor cables under the rock. Attention should be paid to the following aspects:
1. During construction work, please read the instructions in detail to avoid improper operation of the unsafe procedures and cause the quality of the anchor rig operation. Many construction units pay little attention to the construction quality, which leads to the random operation of the anchor rig operators. This way, operating the anchor rig to drill the anchor cables will obviously not stabilize the rock formations and tunnels, and the anchor cables will be white. It is easy to damage the rock formation and cause difficulty in secondary drilling, so be sure to read the drilling rig operating regulations and construction requirements.
2. During anchor cable drilling, it is necessary to check whether there is oil leakage. If there is oil leakage, it will lead to insufficient operation strength and failure to complete the drilling project, and the desired effect will not be achieved.
3. When lowering the anchor cable after drilling the anchor cable drill, pay attention to whether the length of the strand is sufficient, which will affect the grouting effect.
